PINCH VALVES
Pinch valves have a robust construction. They are suitable for abrasive fluids, in aggressive environments, especially in regulating or control applications, one of the main fields of application being the mining sector.
![PINCH VALVES](https://klinger.pt/wp-content/uploads/2023/05/Manual-Pinch-Valves.webp)
MANUAL PINCH VALVES
Elastomer tube folds extend the life of your pinch valves for optimal durability and performance.
Advantages & Key Features:
- Sealed & lubricated closing mechanism
- In-line and quick tube change with patented tube folds for durability & self-cleaning
- Standard Face-to-Face
- Exterior & interior corrosion resistant Fusion Bonded Epoxy Powdercoating
Available Configurations:
- CONTROL – MODULATING (Sizing available)
- ISOLATION – ON/OFF
Specifications:
- Size Range: 1″ (25mm) to 60″ (1500mm)
- Temperature: -46ºC to 121ºC
- Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
- Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
- Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
- Actuation: Manual self-lubricating hand wheel, with or without gear reducer
- Tube Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
- In-Line Tube Change: Yes
- Wear Sensor: Yes, option
- Body Type: Enclosed or Sealed
- Body Material: Ductile iron (CRN available) or aluminum
![PINCH VALVES](https://klinger.pt/wp-content/uploads/2023/05/Pneumatic-Pinch-Valves.webp)
PNEUMATIC PINCH VALVES
Elastomer tube folds extend the life of your pinch valves for optimal durability and performance.
Advantages & Key Features:
- Robust and versatile actuators receptive of positioners of leading manufacturers
- Exterior as well as interior corrosion resistant Fusion Bonded Epoxy Powdercoating
- In-line and quick tube change with patented tube folds for durability & self-cleaning
- Standard Face-to-Face
Available Configurations:
- CONTROL – MODULATING (Sizing available)
- ISOLATION – ON/OFF
Specifications:
- Size Range: 1″ (25mm) to 60″ (1500mm)
- Temperature: -46ºC to 121ºC
- Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
- Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
- Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
- Actuation: Double or Single acting pneumatic, Fail Open or Close
- Tube Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
- In-Line Tube Change: Yes
- Wear Sensor: Yes, option
- Body Type: Enclosed or Sealed
- Body Material: Ductile iron (CRN available) or aluminum
![PINCH VALVES](https://klinger.pt/wp-content/uploads/2023/05/Electric-Pinch-Valves.webp)
ELECTRIC PINCH VALVES
Pinch valve design uses elastomer tube folds to prevent stretching and extend the life of your valve.
Advantages & Key Features:
- Configurable with most electric multi-turn actuators on the market
- Exterior as well as interior corrosion resistant Fusion Bonded Epoxy Powdercoating
- In-line and quick tube change with patented tube folds for durability & self-cleaning
- Standard Face-to-Face
Available Configurations:
- CONTROL – MODULATING (Sizing available)
- ISOLATION – ON/OFF
Specifications:
- Size Range: 1″ (25mm) to 60″ (1500mm)
- Temperature: -46ºC to 121ºC
- Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
- Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
- Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
- Actuation: Electric Actuator with or without manual hand wheel override (120V, 240V, 360V, or 480V)
- Elastomer Qualities: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
- In-Line Tube Change: Yes
- Wear Sensor: Yes, option
- Body Type: Enclosed or Sealed
- Body Material: Ductile iron (CRN available) or aluminum
![PINCH VALVES](https://klinger.pt/wp-content/uploads/2023/05/Hydraulic-Pinch-Valves.webp)
HYDRAULIC PINCH VALVES
The pinch valve design uses elastomer tube folds to prevent stretching and extend the life of your valve.
Advantages & Key Features:
- 2/3 smaller than other actuators – a smart choice for tight spaces
- In-line and quick tube change with patented tube folds for durability & self-cleaning
- Standard Face-to-Face
- Exterior & interior corrosion resistant Fusion Bonded Epoxy Powdercoating
Available Configurations:
- CONTROL – MODULATING (Sizing available)
- ISOLATION – ON/OFF
Specifications:
- Size Range: 1″ (25mm) to 60″ (1500mm)
- Temperature: -46ºC to 121ºC
- Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
- Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
- Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
- Actuation: Hydraulic
- Tube Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
- In-Line Tube Change: Yes
- Wear Sensor: Yes, option
- Body Type: Enclosed or Sealed
- Body Material: Ductile iron (CRN available) or aluminum