KHD-2E KHD-2F KHD-2D MODEL

2-piece flanged ball valves – soft seated

Two-piece ball valves are among the most commonly used ball valves.
As the name implies, a two-piece ball valve consists of two pieces, one with an end connection and the body.
The second piece fits into the first, holds the trim in place, and houses the second end connection.
Flanged ball valves provide effective control of oil and gas operations.
Their characteristic feature is the flanged ends that are bolted to the oil and gas piping.
In general, soft seats are made of thermoplastic materials such as PTFE.
They are ideal for applications where chemical compatibility is important and where the tightest possible seal is essential.
However, soft seats are not recommended for dirty or abrasive process fluids.
Soft seats can break under these conditions, causing leaks in the valve.

KHD-2E BALL VALVE – No mounting pad

These valves are without an ISO mounting interface.
This means that you need a bracket and drive dog to mount the actuator to the valve.

FEATURES
  • Pressure Rating: DIN PN16
  • End Connection: Flanged RF
  • Temperature Range: -4°F to 350°F (-20°C to 180°C) with PTFE seats
STANDARDS
  • End Connection: Flanged RF
  • Temperature Range: -4°F to 350°F (-20°C to 180°C) with PTFE seats

KHD-2F BALL VALVE – ISO regular-mount

The ISO regular-mounting pad accepts direct mounting of pneumatic and electric actuators. .
ISO 5211 is a European standard that specifies requirements for the attachment of part-turn actuators,
with or without gearboxes, to industrial valves

FEATURES
  • Blow-out proof stem
  • With ISO 5211 mounting pad
  • Lever or gear operated
  • Firesafe design available upon request
  • Gland design enables easy re-tightening
STANDARDS
  • Design: EN 12516-1
  • Face-to-Face: DIN 3202-F4/F5
  • Flange End Dimensions: DIN 2633 PN16
  • Inspection & test acc. to EN 12266-1

KHD-2D BALL VALVE – ISO direct-mount

A direct mounting flange according to ISO 5211 is standard for these ball valves.
This feature allows an actuator to be mounted without the need for a mounting bracket and drive adapter.
This results in a significant cost reduction, a compact automated unit, and a higher level of safety for operators.

FEATURES
  • Pressure Rating: Class150, 150PSI Saturated steam
  • End Connection: Flanged RF
  • Temperature Range: -4°F to 350°F (-20°C to 180°C) with PTFE seats
STANDARDS
  • Flange acc. to ASME B16.5
  • Face-to-face acc. to ASME B16.0

DATA SHEET (pdf)