OUR RANGE OF PIPE FITTINGS

Pipe fittings are used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating fluid flow.

PIPE FITTINGS

ACCESSORIES

We have a wide range of accessories and other equipment for tubes. Filters, displays, fittings and screws in any type of material.

PIPE FITTINGS

CORROSION PROTECTED ENERSEAL BOLTLESS FITTINGS

Enerseal boltless fittings are the most economical method of introducing fittings into a large diameter PVC pipeline.

Application

Large Diameter Boltless Socketed Fittings for 315 – 800mm PVC pipe. Our comprehensive range of fabricated EnerSeal fittings includes, but is not limited to the following:

  • Bends
  • Equal Tees, Scour Tees, Hydrant Tees
  • Socketed Puddle Pipes
  • Y Pieces
  • Crosses
  • Flange Adaptors
  • Pressure Testing End Caps
  • Straight Repair Connectors

We will supply weld on EnerSeal sockets, complete with the F576 rubber seal, to customers and fitting fabricators. Enabling customers to manufacture their own EnerSeal Socketed fittings.

Advantages

  • Quick, simple, cost effective installation
  • No bolting required on site
  • Lighter than Cast Ductile Iron Fittings
  • Economically priced, less costly than Cast fittings
  • Locally manufactured, short lead times
  • Robust
  • Various coatings available
  • Any standard or special fitting can be manufactured

Special Coatings

Corrosion protection coatings of Fusion Bonded Epoxy (FBE), Two Pack Wet Spray Epoxy and Hot Dipped Galvanizing are available.

The Range

315 / 355 / 400 / 450 / 500 / 630 / 710 & 800mm OD PVC pipe up to 25 Bar Working Pressure.

PIPE FITTINGS
PIPE FITTINGS

TRADITIONAL OR SOCKETED FABRICATED FITTINGS

KLINGER offers specialized fabricated fittings of metallic pipe and piping components, for either a simple or complex piping systems to safely transport or process liquids, gases, and solids.

Application

Fittings such as Tees, Bends, Reducers, Puddle Pipes etc., are manufactured to order. Corrosion protection coatings such as Carboline or Sigmaguard can be specified.

Socketed Fittings

A socketed fitting is a fabricated steel fitting with a socketed end that consists of a self contained ‘half coupling’ that is suitable for virtually all rigid pipe materials. Plain ended pipe materials such as PVC, GRP and Ductile Iron can be inserted directly into the socketed fitting. Thus eliminating the need for special step couplings and providing special fittings suitable for all rigid pipe materials.

The Range

DN40 – 1200mm.

PIPE FITTINGS

FABRICTAED POLYGRIP FITTINGS

Fabricated PolyGrip Fittings were designed as simple, high performance, full end load restraint, mechanical, socketed fittings for PVC and HDPE pipe.

Application

PolyGrip Fittings, Couplings, Flange Adaptors and Restraining Harnesses are designed to support and grip the pipe, preventing pipe collapse and pipe end pullout. PolyGrip fittings are suitable for a working pressure of up to 16 bar (1600 kPa). Fabricated PolyGrip Fittings of any shape can be manufactured to order, including bends, equal & unequal tees, scour tees, crosses, puddle pipes etc.

Cast Ductile Iron Fittings for PVC pipe are the most economical method of introducing small bore fittings into a PVC pipeline. By combining a PolyGrip Harness with a Cast Ductile Iron Fitting, it can be used as a fully restrained fitting for PVC or HDPE pipe.

The range

PolyGrip Products are available from OD90 – 315mm.