![\"PENSTOCKS\"](\"https:\/\/klinger.pt\/wp-content\/uploads\/2022\/07\/COMPORTA-MURAL.png\")
<\/figure>\n<\/div><\/div>\n\n\n\nWALL-MOUNTED PENSTOCK<\/h2>\n\n\n\n
Four-side sealing flush bottom wall mounted penstock<\/p>\n\n\n\n
Square or rectangular port sliding wall penstocks sealed on all 4 sides.
Used for on-off or control applications in wells, tanks, pipe outlets, etc.
Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer seals.
Available in a wide range of dimensions and for many different pressure heads.
Actuator: Handwheel, Pneumatic, Electric or Hydraulic, with a wide variety of actuator extensions available.<\/p>\n\n\n\n
BIDIRECTIONAL WALL-MOUNTED PENSTOCK 1300×1300 – 4000×4000 DATASHEET (EN)<\/a><\/h5>\n\n\n\nSTANDARD WALL-MOUNTED PENSTOCK 200×200 – 1200×1200 DATASHEET (EN)<\/a><\/h5>\n\n\n\nSTANDARD WALL-MOUNTED PENSTOCK 1300×1300 – 1500×2000 DATASHEET (EN)<\/a><\/h5>\n\n\n\nUNIDIRECTIONAL WALL-MOUNTED PENSTOCK 1300×1300 – 4000×4000 DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n![\"PENSTOCKS\"](\"https:\/\/klinger.pt\/wp-content\/uploads\/2022\/07\/COMPORTA-CANAL.png\")
<\/figure>\n<\/div><\/div>\n\n\n\n\nCHANNEL PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom channel penstock or gate for open channels<\/p>\n\n\n\n
Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides.
Used for on-off or control applications in open channels.
Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal.
Available in a wide range of dimensions and for many different pressure heads.
Actuator: Handwheel, Pneumatic, Electric or Hydraulic, with a wide variety of actuator extensions available.<\/p>\n\n\n\n
CHANNEL PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n![\"PENSTOCKS\"](\"https:\/\/klinger.pt\/wp-content\/uploads\/2022\/07\/COMPORTA-DESCARREGADORA.png\")
<\/figure>\n<\/div><\/div>\n\n\n\n\nWEIR PENSTOCK<\/h2>\n\n\n\n
Three-side and four-side sealing flush bottom downward opening penstock<\/p>\n\n\n\n
The model RB weir gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant upstream water elevation. The RB model weir gate is available from sizes 6\u201dx6\u201d (150mm x 150mm) up to 80\u201dx80\u201d (2000mm x 2000mm).<\/p>\n\n\n\n
The sealing system is incorporated on 3 sides (both laterals and bottom), resulting in a perfect seal without the need of wedges on the gate. This unique design allows to achieve watertight performance on seating and unseating pressure conditions (bi-directional). In addition, a 4 side sealing system is available.<\/p>\n\n\n\n
The leakage rate on the model RB is lower than the maximum allowable recommended by AWWA (C513-05) under normal conditions. We can also design and manufacture the RB weir gate model in larger sizes, higher service conditions and maintain a leakage rate below the allowable standard from AWWA. For larger sizes please contact us.<\/p>\n\n\n\n
WEIR PENSTOCK 150×150 1200×1200 DATASHEET (EN)<\/a><\/h5>\n\n\n\nWEIR PENSTOCK 1300×1300 6000×2500 DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n![\"PENSTOCKS\"](\"https:\/\/klinger.pt\/wp-content\/uploads\/2022\/07\/COMPORTA-ADUFA.png\")
<\/figure>\n<\/div><\/div>\n\n\n\n\nSTOP GATE PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom stop gate penstock with no actuator for open channels<\/p>\n\n\n\n
The model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The slide is hand operated or hoist operated for larger sizes. The sealing system is incorporated on both laterals and bottom area of the slide, resulting in a substantially watertight seal without the nned of wedges on the gate. From sizes 6″ x 6″ (150mm x 150mm) to 140″x140″ (3500mm x 3500mm), the AG model has a unique “lip” type seal design. The leakage rate on the stop gate is lower than the maximum alllowable recommended by AWWA (C561) under normal conditions. The frame of the AG model is typically embedded in a concrete channel for both uni-directional (seating head only) or bi-directional sealing (seating and unseating water head).<\/p>\n\n\n\n
We can also offer different mounting options such as wall mount and existing channel mount where required. Our engineering team can also design and manufacture the AG Stop Gate in larger dimensions and for higher service conditions while maintaining a leakage rate below the allowable standard from AWWA. For more information, please contact us.<\/p>\n\n\n\n
STOP GATE PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n![\"PENSTOCKS\"](\"https:\/\/klinger.pt\/wp-content\/uploads\/2022\/07\/COMPORTA-STOP-LOG-ACO.png\")
<\/figure>\n<\/div><\/div>\n\n\n\n\nSTAINLESS STEEL STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log stainless steel stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SL Stop Log is designed for open channel installations in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants.
The slide is formed by several logs that fit on top of each other in the frame. By adding or removing logs, the SL model allows to control the flow of a channel in a economical way.
The sealing system is incorporated on both laterals and bottom area of each log, resulting in a perfect seal without the need of wedges on the gate. From sizes 6\u201dx 6\u201d (150mm x 150mm) to 80\u201d x 80\u201d (2000mm x 2000mm), the SL model has a unique \u201elip\u201f type seal design.
The frame of the SL model is typically embedded in a concrete, but can also be designed to be wall mounted or face mounted in a existing channel.<\/p>\n\n\n\n
STAINLESS STEEL STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n![\"PENSTOCKS\"\/](\"https:\/\/klinger.pt\/wp-content\/uploads\/2019\/12\/stop-log-thumbnail.jpg\")
<\/figure>\n<\/div><\/div>\n\n\n\n\nALUMINIUN STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log aluminium stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.<\/p>\n\n\n\n
The logs are stacked on top of each other in the frame guides. The water level is controlled by adding or removing logs. The sealing systm is bidirectional (suitable for flows in either direction) and allows to achieve very low leakage rates.<\/p>\n\n\n\n
The frame can be made of aluminum or stainless steel and it can designed to be embedded in concrete, wall mount or face mounted in a existing channel.<\/p>\n\n\n\n
ALUMINIUN STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n![\"PENSTOCKS\"](\"https:\/\/klinger.pt\/wp-content\/uploads\/2023\/05\/image.png\")
<\/figure>\n<\/div><\/div>\n\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n
ROLLER GATE CATALOGUE (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"PENSTOCKS Penstocks \/ Slide Gates for the most diverse applications, sucha as water treatment plants, desalination plants, irrigation systems, storm tanks and floor control systems. WALL-MOUNTED PENSTOCK Four-side sealing flush bottom wall mounted penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe […]<\/p>\n","protected":false},"author":1,"featured_media":18765,"parent":41277,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/servicios.php","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-34071","page","type-page","status-publish","has-post-thumbnail","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/comments?post=34071"}],"version-history":[{"count":31,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions"}],"predecessor-version":[{"id":42473,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions\/42473"}],"up":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/41277"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media\/18765"}],"wp:attachment":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media?parent=34071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
STANDARD WALL-MOUNTED PENSTOCK 1300×1300 – 1500×2000 DATASHEET (EN)<\/a><\/h5>\n\n\n\nUNIDIRECTIONAL WALL-MOUNTED PENSTOCK 1300×1300 – 4000×4000 DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nCHANNEL PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom channel penstock or gate for open channels<\/p>\n\n\n\n
Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides.
Used for on-off or control applications in open channels.
Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal.
Available in a wide range of dimensions and for many different pressure heads.
Actuator: Handwheel, Pneumatic, Electric or Hydraulic, with a wide variety of actuator extensions available.<\/p>\n\n\n\n
CHANNEL PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nWEIR PENSTOCK<\/h2>\n\n\n\n
Three-side and four-side sealing flush bottom downward opening penstock<\/p>\n\n\n\n
The model RB weir gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant upstream water elevation. The RB model weir gate is available from sizes 6\u201dx6\u201d (150mm x 150mm) up to 80\u201dx80\u201d (2000mm x 2000mm).<\/p>\n\n\n\n
The sealing system is incorporated on 3 sides (both laterals and bottom), resulting in a perfect seal without the need of wedges on the gate. This unique design allows to achieve watertight performance on seating and unseating pressure conditions (bi-directional). In addition, a 4 side sealing system is available.<\/p>\n\n\n\n
The leakage rate on the model RB is lower than the maximum allowable recommended by AWWA (C513-05) under normal conditions. We can also design and manufacture the RB weir gate model in larger sizes, higher service conditions and maintain a leakage rate below the allowable standard from AWWA. For larger sizes please contact us.<\/p>\n\n\n\n
WEIR PENSTOCK 150×150 1200×1200 DATASHEET (EN)<\/a><\/h5>\n\n\n\nWEIR PENSTOCK 1300×1300 6000×2500 DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nSTOP GATE PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom stop gate penstock with no actuator for open channels<\/p>\n\n\n\n
The model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The slide is hand operated or hoist operated for larger sizes. The sealing system is incorporated on both laterals and bottom area of the slide, resulting in a substantially watertight seal without the nned of wedges on the gate. From sizes 6″ x 6″ (150mm x 150mm) to 140″x140″ (3500mm x 3500mm), the AG model has a unique “lip” type seal design. The leakage rate on the stop gate is lower than the maximum alllowable recommended by AWWA (C561) under normal conditions. The frame of the AG model is typically embedded in a concrete channel for both uni-directional (seating head only) or bi-directional sealing (seating and unseating water head).<\/p>\n\n\n\n
We can also offer different mounting options such as wall mount and existing channel mount where required. Our engineering team can also design and manufacture the AG Stop Gate in larger dimensions and for higher service conditions while maintaining a leakage rate below the allowable standard from AWWA. For more information, please contact us.<\/p>\n\n\n\n
STOP GATE PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nSTAINLESS STEEL STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log stainless steel stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SL Stop Log is designed for open channel installations in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants.
The slide is formed by several logs that fit on top of each other in the frame. By adding or removing logs, the SL model allows to control the flow of a channel in a economical way.
The sealing system is incorporated on both laterals and bottom area of each log, resulting in a perfect seal without the need of wedges on the gate. From sizes 6\u201dx 6\u201d (150mm x 150mm) to 80\u201d x 80\u201d (2000mm x 2000mm), the SL model has a unique \u201elip\u201f type seal design.
The frame of the SL model is typically embedded in a concrete, but can also be designed to be wall mounted or face mounted in a existing channel.<\/p>\n\n\n\n
STAINLESS STEEL STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nALUMINIUN STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log aluminium stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.<\/p>\n\n\n\n
The logs are stacked on top of each other in the frame guides. The water level is controlled by adding or removing logs. The sealing systm is bidirectional (suitable for flows in either direction) and allows to achieve very low leakage rates.<\/p>\n\n\n\n
The frame can be made of aluminum or stainless steel and it can designed to be embedded in concrete, wall mount or face mounted in a existing channel.<\/p>\n\n\n\n
ALUMINIUN STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n
ROLLER GATE CATALOGUE (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"PENSTOCKS Penstocks \/ Slide Gates for the most diverse applications, sucha as water treatment plants, desalination plants, irrigation systems, storm tanks and floor control systems. WALL-MOUNTED PENSTOCK Four-side sealing flush bottom wall mounted penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe […]<\/p>\n","protected":false},"author":1,"featured_media":18765,"parent":41277,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/servicios.php","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-34071","page","type-page","status-publish","has-post-thumbnail","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/comments?post=34071"}],"version-history":[{"count":31,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions"}],"predecessor-version":[{"id":42473,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions\/42473"}],"up":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/41277"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media\/18765"}],"wp:attachment":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media?parent=34071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/figure>\n<\/div><\/div>\n\n\n\nCHANNEL PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom channel penstock or gate for open channels<\/p>\n\n\n\n
Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides.
Used for on-off or control applications in open channels.
Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal.
Available in a wide range of dimensions and for many different pressure heads.
Actuator: Handwheel, Pneumatic, Electric or Hydraulic, with a wide variety of actuator extensions available.<\/p>\n\n\n\n
CHANNEL PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nWEIR PENSTOCK<\/h2>\n\n\n\n
Three-side and four-side sealing flush bottom downward opening penstock<\/p>\n\n\n\n
The model RB weir gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant upstream water elevation. The RB model weir gate is available from sizes 6\u201dx6\u201d (150mm x 150mm) up to 80\u201dx80\u201d (2000mm x 2000mm).<\/p>\n\n\n\n
The sealing system is incorporated on 3 sides (both laterals and bottom), resulting in a perfect seal without the need of wedges on the gate. This unique design allows to achieve watertight performance on seating and unseating pressure conditions (bi-directional). In addition, a 4 side sealing system is available.<\/p>\n\n\n\n
The leakage rate on the model RB is lower than the maximum allowable recommended by AWWA (C513-05) under normal conditions. We can also design and manufacture the RB weir gate model in larger sizes, higher service conditions and maintain a leakage rate below the allowable standard from AWWA. For larger sizes please contact us.<\/p>\n\n\n\n
WEIR PENSTOCK 150×150 1200×1200 DATASHEET (EN)<\/a><\/h5>\n\n\n\nWEIR PENSTOCK 1300×1300 6000×2500 DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nSTOP GATE PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom stop gate penstock with no actuator for open channels<\/p>\n\n\n\n
The model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The slide is hand operated or hoist operated for larger sizes. The sealing system is incorporated on both laterals and bottom area of the slide, resulting in a substantially watertight seal without the nned of wedges on the gate. From sizes 6″ x 6″ (150mm x 150mm) to 140″x140″ (3500mm x 3500mm), the AG model has a unique “lip” type seal design. The leakage rate on the stop gate is lower than the maximum alllowable recommended by AWWA (C561) under normal conditions. The frame of the AG model is typically embedded in a concrete channel for both uni-directional (seating head only) or bi-directional sealing (seating and unseating water head).<\/p>\n\n\n\n
We can also offer different mounting options such as wall mount and existing channel mount where required. Our engineering team can also design and manufacture the AG Stop Gate in larger dimensions and for higher service conditions while maintaining a leakage rate below the allowable standard from AWWA. For more information, please contact us.<\/p>\n\n\n\n
STOP GATE PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nSTAINLESS STEEL STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log stainless steel stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SL Stop Log is designed for open channel installations in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants.
The slide is formed by several logs that fit on top of each other in the frame. By adding or removing logs, the SL model allows to control the flow of a channel in a economical way.
The sealing system is incorporated on both laterals and bottom area of each log, resulting in a perfect seal without the need of wedges on the gate. From sizes 6\u201dx 6\u201d (150mm x 150mm) to 80\u201d x 80\u201d (2000mm x 2000mm), the SL model has a unique \u201elip\u201f type seal design.
The frame of the SL model is typically embedded in a concrete, but can also be designed to be wall mounted or face mounted in a existing channel.<\/p>\n\n\n\n
STAINLESS STEEL STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nALUMINIUN STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log aluminium stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.<\/p>\n\n\n\n
The logs are stacked on top of each other in the frame guides. The water level is controlled by adding or removing logs. The sealing systm is bidirectional (suitable for flows in either direction) and allows to achieve very low leakage rates.<\/p>\n\n\n\n
The frame can be made of aluminum or stainless steel and it can designed to be embedded in concrete, wall mount or face mounted in a existing channel.<\/p>\n\n\n\n
ALUMINIUN STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n
ROLLER GATE CATALOGUE (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"PENSTOCKS Penstocks \/ Slide Gates for the most diverse applications, sucha as water treatment plants, desalination plants, irrigation systems, storm tanks and floor control systems. WALL-MOUNTED PENSTOCK Four-side sealing flush bottom wall mounted penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe […]<\/p>\n","protected":false},"author":1,"featured_media":18765,"parent":41277,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/servicios.php","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-34071","page","type-page","status-publish","has-post-thumbnail","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/comments?post=34071"}],"version-history":[{"count":31,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions"}],"predecessor-version":[{"id":42473,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions\/42473"}],"up":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/41277"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media\/18765"}],"wp:attachment":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media?parent=34071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/figure>\n<\/div><\/div>\n\n\n\nWEIR PENSTOCK<\/h2>\n\n\n\n
Three-side and four-side sealing flush bottom downward opening penstock<\/p>\n\n\n\n
The model RB weir gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant upstream water elevation. The RB model weir gate is available from sizes 6\u201dx6\u201d (150mm x 150mm) up to 80\u201dx80\u201d (2000mm x 2000mm).<\/p>\n\n\n\n
The sealing system is incorporated on 3 sides (both laterals and bottom), resulting in a perfect seal without the need of wedges on the gate. This unique design allows to achieve watertight performance on seating and unseating pressure conditions (bi-directional). In addition, a 4 side sealing system is available.<\/p>\n\n\n\n
The leakage rate on the model RB is lower than the maximum allowable recommended by AWWA (C513-05) under normal conditions. We can also design and manufacture the RB weir gate model in larger sizes, higher service conditions and maintain a leakage rate below the allowable standard from AWWA. For larger sizes please contact us.<\/p>\n\n\n\n
WEIR PENSTOCK 150×150 1200×1200 DATASHEET (EN)<\/a><\/h5>\n\n\n\nWEIR PENSTOCK 1300×1300 6000×2500 DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nSTOP GATE PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom stop gate penstock with no actuator for open channels<\/p>\n\n\n\n
The model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The slide is hand operated or hoist operated for larger sizes. The sealing system is incorporated on both laterals and bottom area of the slide, resulting in a substantially watertight seal without the nned of wedges on the gate. From sizes 6″ x 6″ (150mm x 150mm) to 140″x140″ (3500mm x 3500mm), the AG model has a unique “lip” type seal design. The leakage rate on the stop gate is lower than the maximum alllowable recommended by AWWA (C561) under normal conditions. The frame of the AG model is typically embedded in a concrete channel for both uni-directional (seating head only) or bi-directional sealing (seating and unseating water head).<\/p>\n\n\n\n
We can also offer different mounting options such as wall mount and existing channel mount where required. Our engineering team can also design and manufacture the AG Stop Gate in larger dimensions and for higher service conditions while maintaining a leakage rate below the allowable standard from AWWA. For more information, please contact us.<\/p>\n\n\n\n
STOP GATE PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nSTAINLESS STEEL STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log stainless steel stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SL Stop Log is designed for open channel installations in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants.
The slide is formed by several logs that fit on top of each other in the frame. By adding or removing logs, the SL model allows to control the flow of a channel in a economical way.
The sealing system is incorporated on both laterals and bottom area of each log, resulting in a perfect seal without the need of wedges on the gate. From sizes 6\u201dx 6\u201d (150mm x 150mm) to 80\u201d x 80\u201d (2000mm x 2000mm), the SL model has a unique \u201elip\u201f type seal design.
The frame of the SL model is typically embedded in a concrete, but can also be designed to be wall mounted or face mounted in a existing channel.<\/p>\n\n\n\n
STAINLESS STEEL STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nALUMINIUN STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log aluminium stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.<\/p>\n\n\n\n
The logs are stacked on top of each other in the frame guides. The water level is controlled by adding or removing logs. The sealing systm is bidirectional (suitable for flows in either direction) and allows to achieve very low leakage rates.<\/p>\n\n\n\n
The frame can be made of aluminum or stainless steel and it can designed to be embedded in concrete, wall mount or face mounted in a existing channel.<\/p>\n\n\n\n
ALUMINIUN STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n
ROLLER GATE CATALOGUE (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"PENSTOCKS Penstocks \/ Slide Gates for the most diverse applications, sucha as water treatment plants, desalination plants, irrigation systems, storm tanks and floor control systems. WALL-MOUNTED PENSTOCK Four-side sealing flush bottom wall mounted penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe […]<\/p>\n","protected":false},"author":1,"featured_media":18765,"parent":41277,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/servicios.php","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-34071","page","type-page","status-publish","has-post-thumbnail","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/comments?post=34071"}],"version-history":[{"count":31,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions"}],"predecessor-version":[{"id":42473,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions\/42473"}],"up":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/41277"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media\/18765"}],"wp:attachment":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media?parent=34071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/figure>\n<\/div><\/div>\n\n\n\nSTOP GATE PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom stop gate penstock with no actuator for open channels<\/p>\n\n\n\n
The model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The slide is hand operated or hoist operated for larger sizes. The sealing system is incorporated on both laterals and bottom area of the slide, resulting in a substantially watertight seal without the nned of wedges on the gate. From sizes 6″ x 6″ (150mm x 150mm) to 140″x140″ (3500mm x 3500mm), the AG model has a unique “lip” type seal design. The leakage rate on the stop gate is lower than the maximum alllowable recommended by AWWA (C561) under normal conditions. The frame of the AG model is typically embedded in a concrete channel for both uni-directional (seating head only) or bi-directional sealing (seating and unseating water head).<\/p>\n\n\n\n
We can also offer different mounting options such as wall mount and existing channel mount where required. Our engineering team can also design and manufacture the AG Stop Gate in larger dimensions and for higher service conditions while maintaining a leakage rate below the allowable standard from AWWA. For more information, please contact us.<\/p>\n\n\n\n
STOP GATE PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nSTAINLESS STEEL STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log stainless steel stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SL Stop Log is designed for open channel installations in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants.
The slide is formed by several logs that fit on top of each other in the frame. By adding or removing logs, the SL model allows to control the flow of a channel in a economical way.
The sealing system is incorporated on both laterals and bottom area of each log, resulting in a perfect seal without the need of wedges on the gate. From sizes 6\u201dx 6\u201d (150mm x 150mm) to 80\u201d x 80\u201d (2000mm x 2000mm), the SL model has a unique \u201elip\u201f type seal design.
The frame of the SL model is typically embedded in a concrete, but can also be designed to be wall mounted or face mounted in a existing channel.<\/p>\n\n\n\n
STAINLESS STEEL STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nALUMINIUN STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log aluminium stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.<\/p>\n\n\n\n
The logs are stacked on top of each other in the frame guides. The water level is controlled by adding or removing logs. The sealing systm is bidirectional (suitable for flows in either direction) and allows to achieve very low leakage rates.<\/p>\n\n\n\n
The frame can be made of aluminum or stainless steel and it can designed to be embedded in concrete, wall mount or face mounted in a existing channel.<\/p>\n\n\n\n
ALUMINIUN STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n
ROLLER GATE CATALOGUE (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"PENSTOCKS Penstocks \/ Slide Gates for the most diverse applications, sucha as water treatment plants, desalination plants, irrigation systems, storm tanks and floor control systems. WALL-MOUNTED PENSTOCK Four-side sealing flush bottom wall mounted penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe […]<\/p>\n","protected":false},"author":1,"featured_media":18765,"parent":41277,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/servicios.php","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-34071","page","type-page","status-publish","has-post-thumbnail","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/comments?post=34071"}],"version-history":[{"count":31,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions"}],"predecessor-version":[{"id":42473,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions\/42473"}],"up":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/41277"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media\/18765"}],"wp:attachment":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media?parent=34071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/figure>\n<\/div><\/div>\n\n\n\nSTAINLESS STEEL STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log stainless steel stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SL Stop Log is designed for open channel installations in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants.
The slide is formed by several logs that fit on top of each other in the frame. By adding or removing logs, the SL model allows to control the flow of a channel in a economical way.
The sealing system is incorporated on both laterals and bottom area of each log, resulting in a perfect seal without the need of wedges on the gate. From sizes 6\u201dx 6\u201d (150mm x 150mm) to 80\u201d x 80\u201d (2000mm x 2000mm), the SL model has a unique \u201elip\u201f type seal design.
The frame of the SL model is typically embedded in a concrete, but can also be designed to be wall mounted or face mounted in a existing channel.<\/p>\n\n\n\n
STAINLESS STEEL STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nALUMINIUN STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log aluminium stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.<\/p>\n\n\n\n
The logs are stacked on top of each other in the frame guides. The water level is controlled by adding or removing logs. The sealing systm is bidirectional (suitable for flows in either direction) and allows to achieve very low leakage rates.<\/p>\n\n\n\n
The frame can be made of aluminum or stainless steel and it can designed to be embedded in concrete, wall mount or face mounted in a existing channel.<\/p>\n\n\n\n
ALUMINIUN STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n
ROLLER GATE CATALOGUE (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"PENSTOCKS Penstocks \/ Slide Gates for the most diverse applications, sucha as water treatment plants, desalination plants, irrigation systems, storm tanks and floor control systems. WALL-MOUNTED PENSTOCK Four-side sealing flush bottom wall mounted penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe […]<\/p>\n","protected":false},"author":1,"featured_media":18765,"parent":41277,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/servicios.php","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-34071","page","type-page","status-publish","has-post-thumbnail","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/comments?post=34071"}],"version-history":[{"count":31,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions"}],"predecessor-version":[{"id":42473,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions\/42473"}],"up":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/41277"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media\/18765"}],"wp:attachment":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media?parent=34071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/figure>\n<\/div><\/div>\n\n\n\nALUMINIUN STOP LOG PENSTOCK<\/h2>\n\n\n\n
Three-side sealing flush bottom multiple log aluminium stop log penstock with no actuator for open channels<\/p>\n\n\n\n
The model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.<\/p>\n\n\n\n
The logs are stacked on top of each other in the frame guides. The water level is controlled by adding or removing logs. The sealing systm is bidirectional (suitable for flows in either direction) and allows to achieve very low leakage rates.<\/p>\n\n\n\n
The frame can be made of aluminum or stainless steel and it can designed to be embedded in concrete, wall mount or face mounted in a existing channel.<\/p>\n\n\n\n
ALUMINIUN STOP LOG PENSTOCK DATASHEET (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<\/div>\n\n\n\n\n\n\n<\/figure>\n<\/div><\/div>\n\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n
ROLLER GATE CATALOGUE (EN)<\/a><\/h5>\n<\/div>\n<\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"PENSTOCKS Penstocks \/ Slide Gates for the most diverse applications, sucha as water treatment plants, desalination plants, irrigation systems, storm tanks and floor control systems. WALL-MOUNTED PENSTOCK Four-side sealing flush bottom wall mounted penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe […]<\/p>\n","protected":false},"author":1,"featured_media":18765,"parent":41277,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/servicios.php","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-34071","page","type-page","status-publish","has-post-thumbnail","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/comments?post=34071"}],"version-history":[{"count":31,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions"}],"predecessor-version":[{"id":42473,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/34071\/revisions\/42473"}],"up":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/pages\/41277"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media\/18765"}],"wp:attachment":[{"href":"https:\/\/klinger.pt\/en\/wp-json\/wp\/v2\/media?parent=34071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/figure>\n<\/div><\/div>\n\n\n\nROLLER GATE<\/h2>\n\n\n\n
Rectangular or square section roller gate with wheels for closing large size openings and penstocks with high water heads<\/p>\n\n\n\n
Flat rectangular roller gate, for easy operation in high head and large opening applications.
Rugged fabricated construction, available in a wide range of sizes and special materials to match specific requirements and depending on the head under which the gate will operate.
Available with hydraulic, electric or manual actuator, with possibility of extended actuator.
May be equipped with by-pass for pressure balancing.<\/p>\n\n\n\n