PINCH VALVES

Pinch valves have a robust construction. They are suitable for abrasive fluids, in aggressive environments, especially in regulating or control applications, one of the main fields of application being the mining sector.

PINCH VALVES

MANUAL PINCH VALVES

Elastomer tube folds extend the life of your pinch valves for optimal durability and performance.

Advantages & Key Features:

  • Sealed & lubricated closing mechanism
  • In-line and quick tube change with patented tube folds for durability & self-cleaning
  • Standard Face-to-Face
  • Exterior & interior corrosion resistant Fusion Bonded Epoxy Powdercoating

Available Configurations:

  • CONTROL – MODULATING (Sizing available)
  • ISOLATION – ON/OFF

Specifications:

  • Size Range: 1″ (25mm) to 60″ (1500mm)
  • Temperature: -46ºC to 121ºC
  • Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
  • Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
  • Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
  • Actuation: Manual self-lubricating hand wheel, with or without gear reducer
  • Tube Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
  • In-Line Tube Change: Yes
  • Wear Sensor: Yes, option
  • Body Type: Enclosed or Sealed
  • Body Material: Ductile iron (CRN available) or aluminum
PINCH VALVES

PNEUMATIC PINCH VALVES

Elastomer tube folds extend the life of your pinch valves for optimal durability and performance.

Advantages & Key Features:

  • Robust and versatile actuators receptive of positioners of leading manufacturers
  • Exterior as well as interior corrosion resistant Fusion Bonded Epoxy Powdercoating
  • In-line and quick tube change with patented tube folds for durability & self-cleaning
  • Standard Face-to-Face

Available Configurations:

  • CONTROL – MODULATING (Sizing available)
  • ISOLATION – ON/OFF

Specifications:

  • Size Range: 1″ (25mm) to 60″ (1500mm)
  • Temperature: -46ºC to 121ºC
  • Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
  • Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
  • Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
  • Actuation: Double or Single acting pneumatic, Fail Open or Close
  • Tube Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
  • In-Line Tube Change: Yes
  • Wear Sensor: Yes, option
  • Body Type: Enclosed or Sealed
  • Body Material: Ductile iron (CRN available) or aluminum
PINCH VALVES

ELECTRIC PINCH VALVES

Pinch valve design uses elastomer tube folds to prevent stretching and extend the life of your valve.

Advantages & Key Features:

  • Configurable with most electric multi-turn actuators on the market
  • Exterior as well as interior corrosion resistant Fusion Bonded Epoxy Powdercoating
  • In-line and quick tube change with patented tube folds for durability & self-cleaning
  • Standard Face-to-Face

Available Configurations:

  • CONTROL – MODULATING (Sizing available)
  • ISOLATION – ON/OFF

Specifications:

  • Size Range: 1″ (25mm) to 60″ (1500mm)
  • Temperature: -46ºC to 121ºC
  • Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
  • Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
  • Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
  • Actuation: Electric Actuator with or without manual hand wheel override (120V, 240V, 360V, or 480V)
  • Elastomer Qualities: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
  • In-Line Tube Change: Yes
  • Wear Sensor: Yes, option
  • Body Type: Enclosed or Sealed
  • Body Material: Ductile iron (CRN available) or aluminum
PINCH VALVES

HYDRAULIC PINCH VALVES

The pinch valve design uses elastomer tube folds to prevent stretching and extend the life of your valve.

Advantages & Key Features:

  • 2/3 smaller than other actuators – a smart choice for tight spaces
  • In-line and quick tube change with patented tube folds for durability & self-cleaning
  • Standard Face-to-Face
  • Exterior & interior corrosion resistant Fusion Bonded Epoxy Powdercoating

Available Configurations:

  • CONTROL – MODULATING (Sizing available)
  • ISOLATION – ON/OFF

Specifications:

  • Size Range: 1″ (25mm) to 60″ (1500mm)
  • Temperature: -46ºC to 121ºC
  • Max. Working Pressure: Up to 300psi (20bar) (consult for higher pressures)
  • Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
  • Flange Drilling: ANSI 150#, ANSI 300#, DIN, JIS, AS
  • Actuation: Hydraulic
  • Tube Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM 
  • In-Line Tube Change: Yes
  • Wear Sensor: Yes, option
  • Body Type: Enclosed or Sealed
  • Body Material: Ductile iron (CRN available) or aluminum
PINCH VALVES CATALOGUE (EN)